Φ5.0 Series External Fixation Fixator – Radius Backbone Frame
External Fixation Fixator - Radius backbone frame Φ5.0 Series
One combination of Φ5.0 external fixator products is the Radius backbone frame. There exist diverse combination techniques for distinct applications.
The actual operation will depend on the fracture; this frame is merely meant to serve as a guide.
Specifics of the frame:
Place two 3 mm bone screws in a parallel pattern at the proximal and distal ends of the radius. Install the connection X and join it with two 30° struts on either side. Next, join all the parts into a frame and lock using two Τ5 L200mm connecting rods (straight type) and four rod to rod couplings VII. (During the procedure, the bone screw's parallel arrangement should be guided by the needle block X.)
Qualities:
1. Simple to use, adaptable combination that can be used to create a stable, three-dimensional external fixation system.
2. During the procedure, the stent can be flexibly assembled in accordance with the adaption symptoms, and parts can be added to the frame whenever needed.
3. The PEEK fix clamp contributes to a lighter overall frame.
4. The PEEK fix clamp is simple to use and has a low developing degree.
5. To lessen stress concentration, an elastic frame is built using carbon fiber connecting rods.
Recommended configurations:
|
Product Image |
Order Code. |
Product Name |
Specification (mm) |
Qty |
 |
20.10.0105200.300
|
Connecting rod (straight) | Ф5, 200mm |
2 |
|
|
20.20.0705201.400 | Rod to rod coupling VII | 2 holes Ф5 |
4 |
|
|
20.20.1005401.400 |
Coupling X |
4 holes Ф3 |
2 |
|
|
20.30.0305101.400 |
30° Post |
Ф5 |
4 |
|
|
19.32.513.0300801 |
Bone screw |
Ф3.0×80mm |
4 |
